Branch data Line data Source code
1 : : /* SPDX-License-Identifier: BSD-3-Clause
2 : : * Copyright(c) 2010-2014 Intel Corporation
3 : : */
4 : :
5 : : #include <stdint.h>
6 : : #include <stdio.h>
7 : : #include <string.h>
8 : : #include <stdlib.h>
9 : : #include <time.h>
10 : :
11 : : #include <rte_common.h>
12 : : #include <rte_cycles.h>
13 : : #include <rte_os_shim.h>
14 : : #include <rte_random.h>
15 : : #include <rte_malloc.h>
16 : :
17 : : #include <rte_memcpy.h>
18 : :
19 : : #include "test.h"
20 : :
21 : : /*
22 : : * Set this to the maximum buffer size you want to test. If it is 0, then the
23 : : * values in the buf_sizes[] array below will be used.
24 : : */
25 : : #define TEST_VALUE_RANGE 0
26 : :
27 : : /* List of buffer sizes to test */
28 : : #if TEST_VALUE_RANGE == 0
29 : : static size_t buf_sizes[] = {
30 : : 1, 2, 3, 4, 5, 6, 7, 8, 9, 12, 15, 16, 17, 31, 32, 33, 63, 64, 65, 127, 128,
31 : : 129, 191, 192, 193, 255, 256, 257, 319, 320, 321, 383, 384, 385, 447, 448,
32 : : 449, 511, 512, 513, 767, 768, 769, 1023, 1024, 1025, 1518, 1522, 1536, 1600,
33 : : 2048, 2560, 3072, 3584, 4096, 4608, 5120, 5632, 6144, 6656, 7168, 7680, 8192
34 : : };
35 : : /* MUST be as large as largest packet size above */
36 : : #define SMALL_BUFFER_SIZE 8192
37 : : #else /* TEST_VALUE_RANGE != 0 */
38 : : static size_t buf_sizes[TEST_VALUE_RANGE];
39 : : #define SMALL_BUFFER_SIZE TEST_VALUE_RANGE
40 : : #endif /* TEST_VALUE_RANGE == 0 */
41 : :
42 : :
43 : : /*
44 : : * Arrays of this size are used for measuring uncached memory accesses by
45 : : * picking a random location within the buffer. Make this smaller if there are
46 : : * memory allocation errors.
47 : : */
48 : : #define LARGE_BUFFER_SIZE (100 * 1024 * 1024)
49 : :
50 : : /* How many times to run timing loop for performance tests */
51 : : #define TEST_ITERATIONS 1000000
52 : : #define TEST_BATCH_SIZE 100
53 : :
54 : : /* Data is aligned on this many bytes (power of 2) */
55 : : #ifdef __AVX512F__
56 : : #define ALIGNMENT_UNIT 64
57 : : #elif defined __AVX2__
58 : : #define ALIGNMENT_UNIT 32
59 : : #else
60 : : #define ALIGNMENT_UNIT 16
61 : : #endif
62 : :
63 : : /*
64 : : * Pointers used in performance tests. The two large buffers are for uncached
65 : : * access where random addresses within the buffer are used for each
66 : : * memcpy. The two small buffers are for cached access.
67 : : */
68 : : static uint8_t *large_buf_read, *large_buf_write;
69 : : static uint8_t *small_buf_read, *small_buf_write;
70 : :
71 : : /* Initialise data buffers. */
72 : : static int
73 : 0 : init_buffers(void)
74 : : {
75 : : unsigned i;
76 : :
77 : 0 : large_buf_read = rte_malloc("memcpy", LARGE_BUFFER_SIZE + ALIGNMENT_UNIT, ALIGNMENT_UNIT);
78 [ # # ]: 0 : if (large_buf_read == NULL)
79 : 0 : goto error_large_buf_read;
80 : :
81 : 0 : large_buf_write = rte_malloc("memcpy", LARGE_BUFFER_SIZE + ALIGNMENT_UNIT, ALIGNMENT_UNIT);
82 [ # # ]: 0 : if (large_buf_write == NULL)
83 : 0 : goto error_large_buf_write;
84 : :
85 : 0 : small_buf_read = rte_malloc("memcpy", SMALL_BUFFER_SIZE + ALIGNMENT_UNIT, ALIGNMENT_UNIT);
86 [ # # ]: 0 : if (small_buf_read == NULL)
87 : 0 : goto error_small_buf_read;
88 : :
89 : 0 : small_buf_write = rte_malloc("memcpy", SMALL_BUFFER_SIZE + ALIGNMENT_UNIT, ALIGNMENT_UNIT);
90 [ # # ]: 0 : if (small_buf_write == NULL)
91 : 0 : goto error_small_buf_write;
92 : :
93 [ # # ]: 0 : for (i = 0; i < LARGE_BUFFER_SIZE; i++)
94 : 0 : large_buf_read[i] = rte_rand();
95 [ # # ]: 0 : for (i = 0; i < SMALL_BUFFER_SIZE; i++)
96 : 0 : small_buf_read[i] = rte_rand();
97 : :
98 : : return 0;
99 : :
100 : : error_small_buf_write:
101 : 0 : rte_free(small_buf_read);
102 : 0 : error_small_buf_read:
103 : 0 : rte_free(large_buf_write);
104 : 0 : error_large_buf_write:
105 : 0 : rte_free(large_buf_read);
106 : 0 : error_large_buf_read:
107 : : printf("ERROR: not enough memory\n");
108 : 0 : return -1;
109 : : }
110 : :
111 : : /* Cleanup data buffers */
112 : : static void
113 : 0 : free_buffers(void)
114 : : {
115 : 0 : rte_free(large_buf_read);
116 : 0 : rte_free(large_buf_write);
117 : 0 : rte_free(small_buf_read);
118 : 0 : rte_free(small_buf_write);
119 : 0 : }
120 : :
121 : : /*
122 : : * Get a random offset into large array, with enough space needed to perform
123 : : * max copy size. Offset is aligned, uoffset is used for unalignment setting.
124 : : */
125 : : static inline size_t
126 : : get_rand_offset(size_t uoffset)
127 : : {
128 : 0 : return ((rte_rand() % (LARGE_BUFFER_SIZE - SMALL_BUFFER_SIZE)) &
129 : 0 : ~(ALIGNMENT_UNIT - 1)) + uoffset;
130 : : }
131 : :
132 : : /* Fill in source and destination addresses. */
133 : : static inline void
134 : 0 : fill_addr_arrays(size_t *dst_addr, int is_dst_cached, size_t dst_uoffset,
135 : : size_t *src_addr, int is_src_cached, size_t src_uoffset)
136 : : {
137 : : unsigned int i;
138 : :
139 [ # # # # : 0 : for (i = 0; i < TEST_BATCH_SIZE; i++) {
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # ]
140 [ # # ]: 0 : dst_addr[i] = (is_dst_cached) ? dst_uoffset : get_rand_offset(dst_uoffset);
141 [ # # ]: 0 : src_addr[i] = (is_src_cached) ? src_uoffset : get_rand_offset(src_uoffset);
142 : : }
143 : 0 : }
144 : :
145 : : /*
146 : : * WORKAROUND: For some reason the first test doing an uncached write
147 : : * takes a very long time (~25 times longer than is expected). So we do
148 : : * it once without timing.
149 : : */
150 : : static void
151 : 0 : do_uncached_write(uint8_t *dst, int is_dst_cached,
152 : : const uint8_t *src, int is_src_cached, size_t size)
153 : : {
154 : : unsigned i, j;
155 : : size_t dst_addrs[TEST_BATCH_SIZE], src_addrs[TEST_BATCH_SIZE];
156 : :
157 [ # # ]: 0 : for (i = 0; i < (TEST_ITERATIONS / TEST_BATCH_SIZE); i++) {
158 : 0 : fill_addr_arrays(dst_addrs, is_dst_cached, 0,
159 : : src_addrs, is_src_cached, 0);
160 [ # # ]: 0 : for (j = 0; j < TEST_BATCH_SIZE; j++) {
161 [ # # ]: 0 : rte_memcpy(dst+dst_addrs[j], src+src_addrs[j], size);
162 : : }
163 : : }
164 : 0 : }
165 : :
166 : : /*
167 : : * Run a single memcpy performance test. This is a macro to ensure that if
168 : : * the "size" parameter is a constant it won't be converted to a variable.
169 : : */
170 : : #define SINGLE_PERF_TEST(dst, is_dst_cached, dst_uoffset, \
171 : : src, is_src_cached, src_uoffset, size) \
172 : : do { \
173 : : unsigned int iter, t; \
174 : : size_t dst_addrs[TEST_BATCH_SIZE], src_addrs[TEST_BATCH_SIZE]; \
175 : : uint64_t start_time, total_time = 0; \
176 : : uint64_t total_time2 = 0; \
177 : : for (iter = 0; iter < (TEST_ITERATIONS / TEST_BATCH_SIZE); iter++) { \
178 : : fill_addr_arrays(dst_addrs, is_dst_cached, dst_uoffset, \
179 : : src_addrs, is_src_cached, src_uoffset); \
180 : : start_time = rte_rdtsc(); \
181 : : for (t = 0; t < TEST_BATCH_SIZE; t++) \
182 : : rte_memcpy(dst+dst_addrs[t], src+src_addrs[t], size); \
183 : : total_time += rte_rdtsc() - start_time; \
184 : : } \
185 : : for (iter = 0; iter < (TEST_ITERATIONS / TEST_BATCH_SIZE); iter++) { \
186 : : fill_addr_arrays(dst_addrs, is_dst_cached, dst_uoffset, \
187 : : src_addrs, is_src_cached, src_uoffset); \
188 : : start_time = rte_rdtsc(); \
189 : : for (t = 0; t < TEST_BATCH_SIZE; t++) \
190 : : memcpy(dst+dst_addrs[t], src+src_addrs[t], size); \
191 : : total_time2 += rte_rdtsc() - start_time; \
192 : : } \
193 : : printf("%3.0f -", (double)total_time / TEST_ITERATIONS); \
194 : : printf("%3.0f", (double)total_time2 / TEST_ITERATIONS); \
195 : : printf("(%6.2f%%) ", ((double)total_time - total_time2)*100/total_time2); \
196 : : } while (0)
197 : :
198 : : /* Run aligned memcpy tests for each cached/uncached permutation */
199 : : #define ALL_PERF_TESTS_FOR_SIZE(n) \
200 : : do { \
201 : : if (__builtin_constant_p(n)) \
202 : : printf("\nC%6u", (unsigned)n); \
203 : : else \
204 : : printf("\n%7u", (unsigned)n); \
205 : : SINGLE_PERF_TEST(small_buf_write, 1, 0, small_buf_read, 1, 0, n); \
206 : : SINGLE_PERF_TEST(large_buf_write, 0, 0, small_buf_read, 1, 0, n); \
207 : : SINGLE_PERF_TEST(small_buf_write, 1, 0, large_buf_read, 0, 0, n); \
208 : : SINGLE_PERF_TEST(large_buf_write, 0, 0, large_buf_read, 0, 0, n); \
209 : : } while (0)
210 : :
211 : : /* Run unaligned memcpy tests for each cached/uncached permutation */
212 : : #define ALL_PERF_TESTS_FOR_SIZE_UNALIGNED(n) \
213 : : do { \
214 : : if (__builtin_constant_p(n)) \
215 : : printf("\nC%6u", (unsigned)n); \
216 : : else \
217 : : printf("\n%7u", (unsigned)n); \
218 : : SINGLE_PERF_TEST(small_buf_write, 1, 1, small_buf_read, 1, 5, n); \
219 : : SINGLE_PERF_TEST(large_buf_write, 0, 1, small_buf_read, 1, 5, n); \
220 : : SINGLE_PERF_TEST(small_buf_write, 1, 1, large_buf_read, 0, 5, n); \
221 : : SINGLE_PERF_TEST(large_buf_write, 0, 1, large_buf_read, 0, 5, n); \
222 : : } while (0)
223 : :
224 : : /* Run memcpy tests for constant length */
225 : : #define ALL_PERF_TEST_FOR_CONSTANT \
226 : : do { \
227 : : TEST_CONSTANT(6U); TEST_CONSTANT(64U); TEST_CONSTANT(128U); \
228 : : TEST_CONSTANT(192U); TEST_CONSTANT(256U); TEST_CONSTANT(512U); \
229 : : TEST_CONSTANT(768U); TEST_CONSTANT(1024U); TEST_CONSTANT(1536U); \
230 : : } while (0)
231 : :
232 : : /* Run all memcpy tests for aligned constant cases */
233 : : static inline void
234 : 0 : perf_test_constant_aligned(void)
235 : : {
236 : : #define TEST_CONSTANT ALL_PERF_TESTS_FOR_SIZE
237 [ # # # # : 0 : ALL_PERF_TEST_FOR_CONSTANT;
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# ]
238 : : #undef TEST_CONSTANT
239 : 0 : }
240 : :
241 : : /* Run all memcpy tests for unaligned constant cases */
242 : : static inline void
243 : 0 : perf_test_constant_unaligned(void)
244 : : {
245 : : #define TEST_CONSTANT ALL_PERF_TESTS_FOR_SIZE_UNALIGNED
246 [ # # # # : 0 : ALL_PERF_TEST_FOR_CONSTANT;
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# ]
247 : : #undef TEST_CONSTANT
248 : 0 : }
249 : :
250 : : /* Run all memcpy tests for aligned variable cases */
251 : : static inline void
252 : 0 : perf_test_variable_aligned(void)
253 : : {
254 : : unsigned i;
255 [ # # ]: 0 : for (i = 0; i < RTE_DIM(buf_sizes); i++) {
256 [ # # # # : 0 : ALL_PERF_TESTS_FOR_SIZE((size_t)buf_sizes[i]);
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # ]
257 : : }
258 : 0 : }
259 : :
260 : : /* Run all memcpy tests for unaligned variable cases */
261 : : static inline void
262 : 0 : perf_test_variable_unaligned(void)
263 : : {
264 : : unsigned i;
265 [ # # ]: 0 : for (i = 0; i < RTE_DIM(buf_sizes); i++) {
266 [ # # # # : 0 : ALL_PERF_TESTS_FOR_SIZE_UNALIGNED((size_t)buf_sizes[i]);
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # # #
# # # ]
267 : : }
268 : 0 : }
269 : :
270 : : /* Run all memcpy tests */
271 : : static int
272 : 0 : perf_test(void)
273 : : {
274 : : int ret;
275 : : struct timespec tv_begin, tv_end;
276 : : double time_aligned, time_unaligned;
277 : : double time_aligned_const, time_unaligned_const;
278 : :
279 : 0 : ret = init_buffers();
280 [ # # ]: 0 : if (ret != 0)
281 : : return ret;
282 : :
283 : : #if TEST_VALUE_RANGE != 0
284 : : /* Set up buf_sizes array, if required */
285 : : unsigned i;
286 : : for (i = 0; i < TEST_VALUE_RANGE; i++)
287 : : buf_sizes[i] = i;
288 : : #endif
289 : :
290 : : /* See function comment */
291 : 0 : do_uncached_write(large_buf_write, 0, small_buf_read, 1, SMALL_BUFFER_SIZE);
292 : :
293 : : printf("\n** rte_memcpy() - memcpy perf. tests (C = compile-time constant) **\n"
294 : : "======= ================= ================= ================= =================\n"
295 : : " Size Cache to cache Cache to mem Mem to cache Mem to mem\n"
296 : : "(bytes) (ticks) (ticks) (ticks) (ticks)\n"
297 : : "------- ----------------- ----------------- ----------------- -----------------");
298 : :
299 : : printf("\n================================= %2dB aligned =================================",
300 : : ALIGNMENT_UNIT);
301 : : /* Do aligned tests where size is a variable */
302 : 0 : timespec_get(&tv_begin, TIME_UTC);
303 : 0 : perf_test_variable_aligned();
304 : 0 : timespec_get(&tv_end, TIME_UTC);
305 : 0 : time_aligned = (double)(tv_end.tv_sec - tv_begin.tv_sec)
306 : 0 : + ((double)tv_end.tv_nsec - tv_begin.tv_nsec) / NS_PER_S;
307 : : printf("\n------- ----------------- ----------------- ----------------- -----------------");
308 : : /* Do aligned tests where size is a compile-time constant */
309 : 0 : timespec_get(&tv_begin, TIME_UTC);
310 : 0 : perf_test_constant_aligned();
311 : 0 : timespec_get(&tv_end, TIME_UTC);
312 : 0 : time_aligned_const = (double)(tv_end.tv_sec - tv_begin.tv_sec)
313 : 0 : + ((double)tv_end.tv_nsec - tv_begin.tv_nsec) / NS_PER_S;
314 : : printf("\n================================== Unaligned ==================================");
315 : : /* Do unaligned tests where size is a variable */
316 : 0 : timespec_get(&tv_begin, TIME_UTC);
317 : 0 : perf_test_variable_unaligned();
318 : 0 : timespec_get(&tv_end, TIME_UTC);
319 : 0 : time_unaligned = (double)(tv_end.tv_sec - tv_begin.tv_sec)
320 : 0 : + ((double)tv_end.tv_nsec - tv_begin.tv_nsec) / NS_PER_S;
321 : : printf("\n------- ----------------- ----------------- ----------------- -----------------");
322 : : /* Do unaligned tests where size is a compile-time constant */
323 : 0 : timespec_get(&tv_begin, TIME_UTC);
324 : 0 : perf_test_constant_unaligned();
325 : 0 : timespec_get(&tv_end, TIME_UTC);
326 : 0 : time_unaligned_const = (double)(tv_end.tv_sec - tv_begin.tv_sec)
327 : 0 : + ((double)tv_end.tv_nsec - tv_begin.tv_nsec) / NS_PER_S;
328 : : printf("\n======= ================= ================= ================= =================\n\n");
329 : :
330 : : printf("Test Execution Time (seconds):\n");
331 : : printf("Aligned variable copy size = %8.3f\n", time_aligned);
332 : : printf("Aligned constant copy size = %8.3f\n", time_aligned_const);
333 : : printf("Unaligned variable copy size = %8.3f\n", time_unaligned);
334 : : printf("Unaligned constant copy size = %8.3f\n", time_unaligned_const);
335 : 0 : free_buffers();
336 : :
337 : 0 : return 0;
338 : : }
339 : :
340 : : static int
341 : 0 : test_memcpy_perf(void)
342 : : {
343 : : int ret;
344 : :
345 : 0 : ret = perf_test();
346 [ # # ]: 0 : if (ret != 0)
347 : 0 : return -1;
348 : : return 0;
349 : : }
350 : :
351 : 251 : REGISTER_PERF_TEST(memcpy_perf_autotest, test_memcpy_perf);
|
